Hard floor restoration
Commercial Floor Scrubbing in Atlanta
Auto-scrubber cleaning that removes what mops spread around, on concrete, tile, VCT and rubber floors.
Why machine scrubbing beats mopping
A mop and bucket redeposits dirty water on the floor; by the end of a large area you're cleaning with soil. An auto-scrubber lays down fresh solution, agitates with brushes or pads, and vacuums the dirty water up through a squeegee in one pass, leaving the floor nearly dry.
That makes scrubbing the backbone of hard-floor care in warehouses, grocery stores, retail, commercial kitchens, schools and parking-level lobbies. It's also the first step before burnishing, recoating or sealing.
Scrubbing applications
- Routine scrubbing of large open floors
- Deep scrubbing of tile and grout with brush decks
- Degreasing of kitchen and production floors
- Pre-scrub before burnish or recoat on finished floors
Scrubbing process
Sweep
Dry debris removal so it doesn't clog the squeegee or scratch the floor.
Edge detail
Corners and edges the machine can't reach are hand-detailed.
Scrub & recover
Overlapping passes with solution and brushes or pads chosen for the surface.
Dry & inspect
Squeegee recovery leaves the floor safe to walk on quickly.
Problems scrubbing solves
Slippery film
Soap and grease residue from mopping builds up. Scrubbing and recovery removes it.
Tire marks
Forklift and cart marks on concrete and VCT respond to the right pad and cleaner.
Dark grout
Brush scrubbing reaches into grout lines that mops ride over.
Matching pad, brush and chemical
Finished floors get soft pads and neutral cleaners so we clean without removing finish. Bare concrete and quarry tile can take aggressive brushes and degreasers. The wrong combination either under-cleans or damages the floor.
Scheduling
Warehouses and retailers often want overnight or weekend scrubbing; kitchens after close. Recurring scrubbing is often bundled with floor maintenance.
Floor scrubbing FAQs
Will scrubbing remove our floor finish?
Not if the right pad and neutral cleaner are used. Aggressive pads and strippers are only used when the goal is to remove finish.
Can you scrub around racking and equipment?
Yes. We use compact walk-behinds in tight aisles and hand-detail where machines can't fit.
How dry is the floor after scrubbing?
An auto-scrubber leaves the floor nearly dry; it's usually walkable within minutes.
Do you bring water and dispose of wastewater?
We'll need access to water and an appropriate drain for wastewater disposal per local rules. We'll confirm on the walkthrough.
Is scrubbing safe for epoxy-coated floors?
Yes, with non-abrasive pads and compatible cleaners.
Free quote
Get a floor scrubbing quote
Tell us the floor type, size and how often you'd like it scrubbed.